How to insert SIM and MicroSD card?
There are three card types
(you can use on OALE phone):
Micro SIM card、Nano SIM card、MicroSD card

Slots with card trays
There are two slots: one is for your Micro SIM and the other is 2-in-1 card slot. The 2-in-1 card is for one Micro SD card or a Nano SIM.
Slot 1: Micro SIM card + Slot 2: Nano SIM card

Slot1: Micro SIM card + Slot 2: MicroSD card

Note: Please note that you cannot use two SIM cards and a SD card (memory card) at the same time.
Installation Steps
Step1: Turn off your phone
Make sure to switch off before removing the card.

Step2: Use pin to get the tray out
To push out the Sim tray all you have to do is to insert pin into the pin-hole, apply a bit of pressure and your sim tray will pop right out.

Step3: Place the card into the slot
Check image for SD card / SIM card arrangement on tray. Please make sure the right side of cards on the card tray.

Step4: Sliding back the SIM tray
When sliding back the sim tray you must be careful and not apply too much pressure.
Note:
1. Please don’t use scissors as a tool for cutting sim cards. It may cause damage to SIM card chips. Contact your carrier for a new or replacement micro SIM card or nano SIM card.
2. Free your SIM card from its plastic casing.
Comments
Post a Comment